Supmea Insertion type electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. In the electromagnetic flowmeter, the conductive medium in the measuring tube is equivalent to the conductive metal rod in the Faraday test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field.
Easy To InstallIt can be made into a non-stop take-out structure, which is convenient for users to maintain and replace. The reliability of the instrument will be greatly improved under harsh working conditions (such as corrosion, dirt, high temperature and high pressur
Wide Range Of UseOne size of point flow sensor can be used for a variety of pipe diameters, which can greatly reduce the number of spare meters and spare parts, and bring a lot of convenience to the design, manufacture and field use.
Simple CalibrationLarge-diameter point-flow type insertion flowmeter calibration is simple and convenient, do not need to calibrate the calibration device caliber and the caliber of the flowmeter corresponds to each other.
| Size | DN100mm-DN3000mm |
| Nominal Pressure | 1.6 Mpa |
| Accuracy | 1.5% |
| Probe | ABS, Polyurethane |
| Electrode | SUS316L, Hastelloy B, Hastelloy C |
| Structure Type | Integral type, remote type |
| Medium Temperature | -20~+80degC |
| Ambient Temperature | -20~+60degC |
| Ambient Humidity | 5~100%RH(Relative humidity) |
| Measuring Range | Max 15m/s |
| Conductivity | >5us/cm |
| Protection Class | IP65(Standard); IP68(Optional for remote type) |
| Process Connection | 2'' Thread(Standard), 2'' Flange(Optional) |
| Output Signal | 4-20mA/Pulse |
| Communication | RS485(Standard), HART(Optional), GPRS/GSM(Optional) |
| Power Supply | AC220V(Can be used for AC85-250V) DC24V(Can be used for DC20-36V) DC12V(Optional), Battery powered 3.6V(Optional) |
| Power Consumption | <20W |
| Alarm | Upper Limit Alarm / Lower Limit Alarm |
| Self-diagnosis | Empty Pipe Alarm, Exciting Alarm |
The SUP-LDG insertion electromagnetic flowmeter is a type of flow meter that is designed to measure the flow of conductive liquids in large pipes. This type of flow meter is installed directly into the pipe and measures the flow of liquid by detecting the electromagnetic field that is generated by the flow. It consists of a probe that is inserted into the pipe and a transmitter that is mounted on the outside of the pipe.
The transmitter generates a magnetic field that is picked up by the probe, and the resulting voltage signal is proportional to the flow rate. Insertion electromagnetic flowmeters are typically used in large pipes where it is not feasible to install a full-bore flow meter, and they are commonly used in industries such as water treatment, wastewater treatment, and chemical processing. One of the advantages of an insertion electromagnetic flowmeter is that it can be installed without having to shut down the process, which can save time and money.
The magnetic inductive flowmeter industry, these are successful cases with comparable and reference value.
In order to reduce measurement errors, whether it is a wafer-type vortex flowmeter or other types of vortex flowmeters, the pressure measurement point should be selected after the table.
View More
The steam prepaid vortex flowmeter cannot be welded with the sensor when welding the flange and the straight pipe section.
View More
The IC card steam prepayment system is composed of a contactless radio frequency Mifare1S50 logic encryption card, intelligent flow meter and control actuator.
View More
Hangzhou Economic Development Area，Hangzhou 310018，China
