Home / Products / SUP-LUGB-C Intelligent Anti-vibration Vortex Flowmeter

sup-lugb-c vortex flowmeter

SUP-LUGB-C Intelligent Anti-vibration Vortex Flowmeter

The SUP-LUGB-C vortex flow meter is a kind of velocity flow meter, which is designed based on the research and design of the Karman vortex principle. It is mainly used for flow measurement of medium fluid in industrial pipelines, such as gas, steam, or liquid, and other media. Flow control and metering. The LUGB vortex flow meter can realize the following functions according to different types: measure the temperature, pressure, instantaneous flow, and cumulative flow of the industrial pipeline medium fluid, and has pulse output, (4~20)mA analog signal output, RS485 communication (Modbus RTU protocol), IoT GPRS and other functions.

  • Pipe diameter: DN15-DN300
  • Accuracy:Flow: ±1.5%R; plug-in type: ±2.5%R
  • Range Ratio: 1:8
  • Ingress protection: IP65
  • Product Features
  • Product Parameters
  • Product Introduction

  • Simple Structure And Easy Maintenance

    The main body of the product has no moving parts, high reliability, long-term stability, simple structure and easy maintenance.

  • Stable Performance

    The output of the sensor is pulse frequency, its frequency is linear with the actual flow rate of the measured fluid, the zero point has no drift, and the performance is very stable.

  • Diverse Structural Forms

    Various structural forms, including pipeline type, insertion type flow sensor and other forms.

  • High Precision

    High accuracy, the measurement accuracy of conventional liquid is ±1.0%; the measurement accuracy of gas is ±1.5%.

sup-lugb-c vortex flowmeter

Features: 1.Ability to measure flow accurately and reliably; 2.The pressure loss is small (about 1/4~1/2 of the orifice flow meter), which belongs to the energy-saving flow meter; 3.The installation method is flexible, and it can be installed horizontally, vertically or inclined at different angles according to the different process pipelines on site; 4.The circuit adopts multiple protection modes, anti-surge and strong adaptability; 5.The high-precision probe adopts the piezoelectric wafer vortex sensor, and the signal is stable.

Product List

Product List

Success cases

The magnetic inductive flowmeter industry, these are successful cases with comparable and reference value.

  • Efficient application of ultrapure water flow measurement in water filtration plants

    Metal tube rotor flowmeter in ultrapure water flow measurement has the advantages of wide measuring range, long life, low maintenance, etc. It can monitor the flow change in real time, realize automation control, improve the production efficiency, and at the same time reduce the waste of resources and environmental pollution. When using, you need to ensure that the pipeline is clean, regular inspection and calibration, pay attention to the use of the environment.

    View More

  • Thermal gas mass flowmeters for steel production processes

    Thermal gas mass flow meters are widely used in iron and steel production for nitrogen protection gas and purge gas, argon refining process to accurately control the inlet gas flow, as well as high temperature and corrosive environment flow measurement. Its high accuracy, fast response and high sensitivity characteristics make it has a wide range of prospects in this field.

    View More

  • Why don't magnetic inductive flowmeters have a three-wire system?

    Magnetic inductive flowmeters can be three-wire but are rarely used because they are based on Faraday's Law and require a stable power supply and accurate signal transmission.

    View More

Please Fill In Your Request And We Will Contact You As Soon As Possible!

Whatsapp
+8613613816589
Inquiry
Top