sup-lugb vortex flowmeter

SUP-LUGB Vortex Flowmeter Wafer Installation

SUP-LUGB Vortex flowmeter work on the principle of generated vortex and relation between vortex and flow by theory of Karman and Strouhal, which specialize in measurement of steam, gas and liquid of lower viscosity.

  • Pipe diameter: DN15-DN300
  • Accuracy: 1.0% 1.5%
  • Range Ratio: 1:8
  • Ingress protection: IP65
  • Product Features
  • Product Parameters
  • Product Introduction
  • Fully Isolated Structure Circuit

    Anti-vibration high-quality filter processing.

  • Simple Structure

    Vortex flowmeter sensor structure is simple, there is no movable parts in the tube, there is no throttle parts that can impede the flow of fluid, is one of the flowmeter products in the operation of low energy consumption flow meter.

  • Wide Range Of Applications

    Electromagnetic flowmeter can measure dirty media, but to be in the measurement process also need to pay attention to avoid contact with corrosive properties of the liquid; and vortex flowmeter can not only measure sewage, but also can measure with corros

  • Extremely Wide Range Unit

    Vortex flowmeter output is only proportional to the average flow rate of the measured medium, and has nothing to do with the flow state under the symmetrical distribution. Therefore, the vortex flowmeter range unit is extremely wide, its measurement range degree up to 100:1, sometimes even up to 1000:1 can run the flow range.

 Product  Vortex flowmeter wafer installation
 Model  SUP-LUGB
 Diameter nominal  DN15~DN300
 Installation  Wafer connection: DN15-DN300(priority PN2.5MPa)
 Accuracy  1.5%, 1.0%
 Range Ratio  Gas density:1.2kg/m3, Range ratio: 8:1
 Medium Temperature  -20°C ~ +150°C、-20°C ~ +260°C、-20°C ~ +300°C
 Output signal  4-20mA
 Frequency  RS485 communication (Modbus RTU)
 Power supply  24VDC±5%  Li battery (3.6 VDC)
 Ingress protection  IP65
 Body Materials  Stainless shell
 Display  128*64 dot matrix LCD
sup-lugb vortex flowmeter

A fluid flowing with a certain velocity and passing a fixed obstruction generates vortices. The generation of vortices is known as Karman’s Vortices.The frequency of vortex shedding is a direct linear function of fluid velocity and frequency depends upon the shape and face width of bluff body. Since the width of obstruction and the inner diameter of the pipe will be more or less constant, the frequency is given by the expression: f=(St*V)/c*D

Success cases

The magnetic inductive flowmeter industry, these are successful cases with comparable and reference value.

Please Fill In Your Request And We Will Contact You As Soon As Possible!