Disassemble the split type vortex flowmeter

Time: 2024-10-24
Equipment Configuration:split type vortex flowmeter

Split type vortex flowmeter disassembly: Split type vortex flowmeter is a highly reliable device for measuring fluid flow rate.

Project Overview

  Split type vortex flowmeter disassembly: Split type vortex flowmeter is a highly reliable device for measuring fluid flow rate. Compared with traditional vortex flowmeters, split vortex flowmeters have advantages such as easy installation and convenient maintenance. This article will provide a detailed introduction to the disassembly steps of the split type vortex flowmeter to assist users in correctly disassembling and maintaining the instrument.

  The disassembly steps for the split type vortex flowmeter are as follows:

  1. Disassemble the converter and loosen the bolts that secure the converter to the pipeline. Carefully remove the converter from the pipeline. Disconnect the cable connection between the converter and the sensor. 2. Disassemble the sensor and loosen the flange bolts that secure the sensor to the pipeline. Remove the sensor from the pipeline, paying attention to aligning the sensor with the pipeline to avoid damaging the sensor. 3. Disassemble the sensor rod and loosen the fixing screw between the sensor rod and the sensor. Pull the sensor rod out of the sensor. 4. If the gasket between the sensor and the pipeline is damaged or aged, a new gasket needs to be replaced. When tightening flange bolts, be careful not to tighten them too tightly to avoid damaging gaskets or pipelines.

  5. Reinstall the sensor and sensor rod to connect the sensor rod to the sensor. Align the sensor with the pipeline and install it in place. Tighten the flange bolts. 6. Reinstall the converter to align it with the pipeline and install it in place. Tighten the bolts that secure the converter. Reconnect the cable between the converter and the sensor. The disassembly of a split type vortex flowmeter is a relatively simple operation. As long as you follow the steps introduced in this article and pay attention to the relevant points, you can safely and smoothly disassemble the instrument. By regular disassembly and maintenance, the service life of the flowmeter can be effectively extended, ensuring its measurement accuracy and reliability.

  If you have any questions or difficulties when disassembling the split type vortex flowmeter, it is recommended to contact the instrument supplier or technical personnel for assistance in a timely manner.

Related Cases

The magnetic inductive flowmeter industry, these are successful cases with comparable and reference value.

Please Fill In Your Request And We Will Contact You As Soon As Possible!

Whatsapp
Inquiry
Top