What are the special points to note when installing a metal tube float flowmeter?

Project Overview

Installation of the instrument is a very important step for those who use the instrument. Only when the instrument is installed correctly will there be nothing around it that will interfere with the instrument during the measurement process. Nevertheless, there are still many things to pay attention to during the installation of a metal tube float flowmeter with high accuracy. In order to achieve a certain measurement accuracy of the metal tube float flowmeter during use, the following points must be paid attention to during installation:

① The metal tube float flowmeter should be installed on the process pipeline and installed next to it Some bypass pipes and bypass valves. This is also to better replace the flow meter and clean the pipeline during inspection and maintenance, and to facilitate the daily inspection of the metal tube float flow meter.

②Install a magnetic filter and install the filter between the valve and the pipe, so that the magnetic substances in the medium can be smoothly filtered out when using the flow meter for measurement. If the medium contains solid impurities, they can also be filtered out when passing through the filter.

③Install a valve at the instrument outlet. This is also to prevent direct emissions from the flow meter outlet when measuring gas flow. If the gas is discharged directly from the outlet, it is easy to reduce the gas pressure, causing data failure.

④ Avoid installing the instrument in a place exposed to direct sunlight. This will damage the LCD instrument and greatly reduce the service life of the LCD display.

As soon as the instrument is installed, it should start with the instrument itself. Don't install instruments because you feel comfortable working on them. That could cause a lot of damage to the instrument, and the end result would still be wrong.