Influence of different caliber V-cone flow meters on the selection of sensor size when measuring bla

Project Overview

　　Measurement of blast furnace gas, corresponding to the size of the pipeline will affect the selection of the caliber of the V cone flowmeter, and different calibers selected by the V cone flowmeter shape of the size is not the same.

　　In the nominal diameter of the pipe between 15mm-50mm, the general rated pressure of 4MPa, this time from the direction of flow through the pipe end point from the first pressure pipe distance are the same, and the two pressure pipe opening size are a quarter.

　　In the pipe nominal diameter of 65mm-2000mm between the rated pressure will become smaller and smaller, from the flow direction to see through the pipe end point from the first pressure pipe distance is different, at this time the two pressure pipe opening size are one half.

　　And different sizes for the V cone flowmeter straight through the cone of the pipe welding method is not the same, small diameter V cone flowmeter cone welded on both sides of the pipe, large caliber is connected to the pilot tube, only welded on one side.

　　So for different caliber V cone flowmeter, I believe that we have a certain understanding of the choice of sensor size, but also welcome you to communicate and learn together.