Electromagnetic flowmeter installation site conditions have two points to note

Project Overview

With the development of science and technology and the needs of industrial production, more and more companies are beginning to use electromagnetic flowmeters for production management. However, after selecting the electromagnetic flowmeter parameters and receiving the product, you may still encounter problems at the installation site.

So we need to pay special attention to two aspects: one is the reserved length of the pipeline, and the other is whether the diameter of the pipeline matches the flow meter. These two determine whether we can seal the electromagnetic flowmeter with the on-site pipeline without leaking.

Regarding the reserved length of the pipeline, this is very important during the installation process of the electromagnetic flowmeter. Generally speaking, whether the electromagnetic flowmeter is installed on a horizontal pipeline or a vertical pipeline, it must ensure that there is enough straight pipe section. First, to ensure the accuracy of measurement, and second, to ensure that the electromagnetic flowmeter can be installed. If the reserved length of the pipeline is insufficient and is smaller than the length of the electromagnetic flowmeter, it will need to be re-cut, and the cost will be higher.

Secondly, the matching of pipe diameter and flow meter is also very important. If the caliber of the flowmeter selected is too large or too small, it may lead to increased errors in the measurement results. Therefore, when selecting a flowmeter, the appropriate pipe diameter must be determined based on the actual working conditions in order to obtain more accurate measurement data. However, if the specifications are found to be different after arriving at the site, the reduction pipe can be used to compensate to a certain extent, which is also a low-cost approach.

In general, the installation of electromagnetic flowmeter is a comprehensive and professional work, and there are many factors that need to be considered. It is necessary to understand the length and height of the electromagnetic flowmeter body and determine the on-site environment to ensure its normal operation and exert its due effect. Therefore, when selecting and installing electromagnetic flow meters, we must pay more attention to avoid unnecessary problems and troubles.