HSP balance flowmeter technical parameters

Project Overview

Supmea Measurement and Control HSP series balance flow meter is a new type of differential pressure flow meter. It adopts a unique Reynolds number, increases the thickness of the throttling part and the processing accuracy to make the flow performance close to Venturi. Its ingenious structural design can exchange a relatively small permanent pressure loss for a large stable differential pressure value under the shortest straight pipe section requirement, achieving high-precision long-term stable measurement.

HSP balance flow meter technical parameters:

1. Pipe diameter range: DN20-DN3000

2. Accuracy level: ±1%

3. Straight pipe section: 3D before the meter, 1D after the meter

4. Range ratio: 10:1, it can be made wider if the working conditions are suitable

5. Repeatability: 0.1%

6.Re range:

7.B range: 0.25-0.9

8. Temperature upper limit: 650℃

9. Upper pressure limit: 42Mpa

The above are the technical parameters of the HSP series balance flowmeter. Compared with traditional throttling devices, the HSP series balance flowmeter has significant features such as balanced rectification, and is widely used in petroleum, chemical industry, metallurgy, electric power, natural gas, water treatment and other fields. For more technical questions about balance flowmeters, vortex flowmeters, magnetic inductive flowmeters, ultrasonic flowmeters, etc., please feel free to contact Supmea Measurement and Control Technology Co., Ltd.~