Vortex flowmeter selection must pay attention to these points

Project Overview

Vortex flow meters can measure flow rates for both gas and liquid media, so they are widely used. However, although the vortex flowmeter is good, it will not work if the model is not chosen correctly.

The following points are the necessary parameters for quick selection summarized by vortex flowmeter manufacturers based on years of experience:

The first point is the medium: whether it is corrosive and whether it is volatile , whether it is a gas or a liquid, etc., because these will affect the choice of its body material.

The second point is temperature: is it normal temperature or high temperature, does it need to be insulated, and what is the highest temperature that can be achieved on site. There is a structural difference between the ordinary type and the high-temperature type. The ordinary type cannot measure high temperatures.

The third point of pressure: whether it is within the rated pressure range or exceeds the rated pressure, does it need to be customized?

The three points of appeal are collectively referred to as the three elements of working conditions, which are the most important selection references besides caliber size and flow range. With these points, you can basically get a rough price range, and more details will determine the specific price. At the same time, these points also determine whether the flow meter can perform normal measurements at the site, so you must pay attention when selecting the model.