The use of magnetic flap level meter common problems and solutions

Project Overview

1. Introduction

The magnetic flap level gauge is a liquid level measuring instrument widely used in chemical, petroleum, food and other industries. Because of its simple structure, easy maintenance, corrosion resistance and other advantages, it is favored by the majority of users. However, in actual use, magnetic flap level gauges will also encounter some common problems. This article will discuss these issues and propose corresponding solutions.

2. Frequently Asked Questions

Magnetic flap does not flip: When the magnetic flap of the liquid level gauge does not flip, it may be due to abnormal magnetic field or stuck flap. . At this time, check whether the magnetic float is damaged or fallen off, and remove debris around the flap to ensure the normal operation of the liquid level gauge.

Inaccurate readings: If the readings of the liquid level gauge are inaccurate, it may be caused by factors such as improper installation position of the liquid level gauge or impurities in the liquid. At this time, the installation position of the liquid level gauge should be readjusted and the inside of the liquid level gauge should be cleaned to ensure normal measurement of the liquid level gauge.

Large fluctuations in liquid level: Large fluctuations in liquid level may be caused by uneven mixing of the liquid or vibration of the pipeline. At this time, measures should be taken to fix the liquid level gauge to reduce the impact of pipeline vibration on the liquid level gauge.

Difficulty in maintenance: For some liquid level gauges installed in deep wells or at high altitudes, maintenance and repair may be difficult. At this time, the maintenance plan should be reasonably arranged and regular inspections should be carried out to ensure the normal operation of the liquid level gauge.

3. Solution

For the problem of the magnetic flap not turning, you can check whether the magnetic float is damaged or fallen off. If damaged, the magnetic float needs to be replaced with a new one; if it falls off, the magnetic float needs to be reinstalled. At the same time, clear the debris around the flap to ensure the normal operation of the liquid level gauge.

For the problem of inaccurate readings, you can re-adjust the installation position of the liquid level gauge and clean the inside of the liquid level gauge. In addition, check the liquid for impurities and filter it if necessary. Through these measures, the measurement accuracy of the liquid level gauge can be improved.

For the problem of large liquid level fluctuations, fixing measures for the liquid level gauge can be added to reduce the impact of pipeline vibration on the liquid level gauge. At the same time, check whether the liquid is stirred evenly, and if necessary, optimize the liquid stirring process. Through these measures, liquid level fluctuations can be reduced.

For difficult maintenance problems, maintenance plans can be reasonably arranged and regular inspections can be carried out. For liquid level gauges installed in deep wells or high altitudes, remote monitoring systems can be used for real-time monitoring to detect and solve problems in a timely manner. At the same time, prepare enough necessary maintenance supplies such as wearing parts and tools to facilitate replacement and repair when necessary. Through these measures, maintenance difficulty can be reduced and the operational reliability of the liquid level gauge can be improved.

IV. Conclusion

This article discusses common problems that may be encountered during the use of magnetic flap level gauges, and proposes corresponding solutions. In actual use, users should choose the appropriate solution according to the specific situation. through fair use andMaintaining the magnetic flap level gauge can improve its operating efficiency and measurement accuracy and extend its service life.