HSD series split magnetic flowmeter

Project Overview

HSD series split magnetic inductive flowmeter is an instrument that applies the principle of electromagnetic induction to measure the flow of conductive fluid based on the electromotive force induced when the conductive fluid passes through an external magnetic field. According to different display modes, they are divided into two types: integrated magnetic inductive flowmeter and split type magnetic inductive flowmeter. The remote type magnetic inductive flowmeter requires a special cable to connect the converter and sensor.

Features of HSD series magnetic inductive flowmeter

1. It is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity, and the linear measurement principle can achieve high-precision measurement.

2. There are no flow obstructions and moving parts in the measuring tube, and the pressure loss is small, so it will not cause additional energy loss or blockage. The energy saving effect is significant, and it is especially suitable for liquid-solid two-phase flow media, such as Measurement of sewage, mud, mineral pulp, paper pulp, etc.

3. The installation requirements are low, the front straight pipe section only requires 5D, and the rear straight pipe section is 3D (D is the inner diameter of the selected instrument).

4. The nominal diameter DN3-DN3000 covers a wide range, with a variety of linings and electrodes to choose from, which can meet the requirements for measuring various conductive flows.

5. With MODBUS-RS485, HART, GPRS and PROFIBUS communication signal output (optional).

6. The converter uses a 32-bit embedded microprocessor, full digital processing, fast operation speed, strong anti-interference ability, reliable measurement, high accuracy, and the measurement range can reach 1500:1.

7. High-definition backlit LCD display, full Chinese character menu operation, easy to use, simple to operate, easy to learn and understand.

It has conductivity measurement function, can determine whether the sensor is empty, and has self-test and self-diagnosis functions.

8. The internal calculator can display forward cumulative flow, reverse cumulative flow and instantaneous flow respectively.

9. The plug-in magnetic inductive flowmeter is simple to install and can open holes under pressure on-site without flow. It has installation and price advantages.

In practical applications, HSD series magnetic inductive flowmeters are often used to measure the volume flow of conductive fluids in closed pipelines. In addition, it is also widely used in flow measurement and control in industrial and agricultural production processes such as petroleum, chemical industry, iron and steel metallurgy, water supply and drainage, water conservancy irrigation, water treatment, environmental sewage measurement and control, papermaking, medicine, food, etc.

For magnetic inductive flowmeter, vortex flowmeter, ultrasonic flowmeter, balance flowmeter and other related technical exchanges, please feel free to contact us at any time~