Can the insertion type electromagnetic flowmeter with ball valve?

Project Overview

　　Insertion type electromagnetic flowmeter with ball valve can protect the equipment, easy to maintain, easy to change the debugging, suitable for non-constant flow loading and unloading occasions, such as industrial automation, water treatment. Installation needs to ensure that the ball valve switch is reliable, selection should consider the nature of the medium, follow the installation specification.

　　Insertion type electromagnetic flowmeter can be with ball valve, and in many practical application scenarios, the installation of ball valve is very necessary and recommended. The following is a detailed explanation of insertion type electromagnetic flowmeter with ball valve:

　　I. Necessity

　　Protect the equipment:

　　Insertion type electromagnetic flowmeter is usually installed in the pipeline for measuring the flow of liquid or gas.

　　In the actual production process, the medium in the pipeline may have unstable pressure changes, shocks or vibration and other problems.

　　The ball valve can act as a safety valve to prevent these unstable factors from entering the inside of the electromagnetic flowmeter, thus protecting the electromagnetic flowmeter from damage.

　　Easy maintenance:

　　Electromagnetic flowmeter is a precision instrumentation equipment, for maintenance and repair are very important.

　　When the electromagnetic flowmeter needs to be maintained or repaired, if there is no ball valve to cut off the pipeline fluid, will bring a lot of trouble.

　　Equipped with a ball valve insertion electromagnetic flowmeter can be closed by the ball valve to cut off the fluid, thus only affecting the flowmeter itself, and will not have an impact on the entire piping system. When it is necessary to repair or maintain the electromagnetic flowmeter, just close the ball valve.

　　Easy changeover and commissioning:

　　In practice, it may be necessary to replace or commission the insertion type electromagnetic flowmeter.

　　Without a ball valve to act as a shut-off valve, it would be necessary to stop the flow of fluid through the entire piping system in order to perform these operations.

　　After the installation of the ball valve, only need to close the ball valve can be replaced or debugging, greatly improving efficiency and reducing the risk of production interruption.

　　Second, the application scene

　　Insertion type electromagnetic flowmeter with ball valve structure is suitable for a variety of requirements for non-stop flow loading and unloading or do not allow the media overflow occasions. For example, in industrial automation, water treatment, energy and other fields, this structure of the flowmeter is widely used. In these areas, the stable flow of fluid and accurate measurement is essential for the control and monitoring of the production process.

　　Third, installation precautions

　　During installation, it should be ensured that the ball valve is flexible and reliable in switching, and regularly checked and maintained.

　　The selection of ball valves should be based on the nature of the medium, temperature and pressure and other factors for comprehensive consideration.

　　The installation process should follow the relevant installation specifications and standards to ensure that the flowmeter and ball valves are properly installed and commissioned.

　　In summary, the insertion type electromagnetic flowmeter can be with ball valve, and this structure has many advantages and necessity in practical application.