Operating characteristics of the HSP balance flowmeter

Project Overview

HSP balance flowmeter can measure vapor-liquid two-phase, slurry, and even solid particles, and can also measure bidirectional flow. It has been widely used in petroleum, chemical industry, metallurgy, electric power, natural gas, water treatment and other industries.

Working characteristics of HSP balance flowmeter

1. Superior comprehensive performance

The balance flow sensor has the characteristics of a symmetrical porous structure, which can balance the flow field and reduce the The eddy current, vibration and signal noise are eliminated, and the flow field stability is greatly improved.

2. Low requirements for straight pipe sections

Because the flow field is stable and the pressure recovery is twice faster than the orifice plate, the balanced flow sensor greatly shortens the requirements for the straight pipe section. Pipe segments are generally 3D in front and 2D in back.

3. Reduce permanent pressure loss

The porous symmetrical balance design reduces the formation of turbulent shear force and vortex, and reduces the loss of kinetic energy. Under the same measurement conditions, the permanent pressure loss is reduced by 2.5 times compared with the orifice plate, thus saving operating energy costs.

4. Resistant to dirt and not easy to blockage

Porous symmetrical balanced design reduces the formation of retention dead zones, ensures that dirty media can pass through multiple holes smoothly, and reduces fluid pores Chances of being clogged.

5. Wide flow measurement range

According to the test results, the range ratio is more than 1:10.

6. Good long-term stability.

Due to the obvious reduction of turbulent shear force, the direct friction between the medium and the throttling member is greatly reduced. Its β value remains unchanged for a long time. The entire instrument has no moving parts, so it can be used for a long time. Maintain stability.

7. Can measure high-temperature and high-pressure media

Like other throttling devices, the working temperature and pressure depend on the material and grade of the pipe and flange. The working temperature can reach 850°C. The pressure can reach 42MPa.

8. Measurable media under complex working conditions

Due to its special structural design, it has special performance. It can handle various mixed gases (such as gas, biogas, coal gas, etc.) and various low-temperature gases (such as LNG, liquid nitrogen, liquid oxygen, liquid argon, liquid hydrogen, liquid chlorine, liquefied ethylene, liquefied petroleum gas, etc.) , measurement of gas-liquid two-phase media (such as moisture), slurry, multi-phase water flow, vibrating water flow, electromagnetic interference media and bidirectional flow (because the balance flow meter is completely symmetrical on the left and right).

HSP balance flowmeter is an energy-saving flowmeter developed by Supmea Measurement and Control. It has been widely used in petroleum, chemical industry, metallurgy, electric power, natural gas, water treatment and other industries. For more information about the selection, installation, after-sales and technical issues of the balanced flow meter, please feel free to contact us~