How to avoid malfunctions with metal tube float flow meters?

Project Overview

It can be said that the metal tube float flowmeter is a high-precision sensing instrument. Due to improper use, there are many behaviors that lead to inaccurate final measurement data. This kind of deviation can be controlled in some cases, but as long as there is this kind of deviation, there must be errors in some part of the measurement process, but as long as these things can be seriously resolved, it will be fine. .

Failures are mainly caused by improper use before installation or during use, but they can be repaired as long as they are handled with care.

In many cases, electromagnetic flow meters will not work properly due to improper use or interference from some external columns during use. However, what kind of interference or cause can cause electromagnetic flowmeter failure? Failure is not terrible, as long as it can be solved, there are several examples of failure.

If you are not careful during the installation process, problems can easily occur. In many cases, this is because there is a large deviation in the installation position of the sensor during the installation process, and even installation errors can lead to failure. If the electromagnetic flowmeter is installed in a place with current interference or a strong spatial magnetic field, it is not allowed. External magnetic force will have a certain impact on the sensor. At the same time, these electromagnetic effects will inevitably cause the electromagnetic flowmeter to fail to obtain satisfactory results during the measurement process.

During the measurement process, the bubbles in the liquid being measured change, which also changes the measurement results in disguised form. Finally, an accurate data will certainly not be obtained. As long as you can ensure that there is no interference from the outside during the working process, you can use the flow meter better.