Which parameter is important to note when measuring converter gas flow with a V-cone flow meter?

Project Overview

　　Converter gas flow measurement generally use V cone flowmeter, but V cone flowmeter finished product is not exactly the same, for different pipelines using different parameters of the flowmeter.

　　V cone flowmeter according to its caliber size, its nominal diameter from 15mm to 2000mm can be selected, the specific choice of how big, should be based on the site of the pipeline to decide, different caliber corresponding to the length of the V cone flowmeter is also different, so in determining the caliber of the pipeline when the size of the pipeline, should remind the user to set aside a good length of its counterpart, only so that in the later stages of the installation does not appear in the size of the installation does not fit the dilemma. Dilemma.

　　For example, in the understanding of the site pipeline is DN100, then the length of the pipeline should be reserved in 425 or so, otherwise it will lead to the inability to install, re-change, whether it is the flowmeter or the pipeline are time-consuming and laborious, but also delayed production.

　　In short, in the use of V cone flowmeter to measure converter gas, must pay attention to choose the appropriate caliber, reserve the appropriate length, in order to achieve the best results.

　　On the choice of V cone flowmeter what other parameter value of attention, also welcome to exchange discussions.