After brushing the magnetic flap level gauge

Time: 2024-10-24
Equipment Configuration:magnetic flap level gauge

Magnetic flap level gauge, as a commonly used level measuring instrument, is applied in industries such as petroleum, chemical, power, metallurgy.

Project Overview

  Magnetic flap level gauge, as a commonly used level measuring instrument, is applied in industries such as petroleum, chemical, power, metallurgy, and environmental protection due to its advantages of simple structure, high reliability, and easy maintenance. However, during long-term use, the flap of the magnetic flap level gauge may experience issues such as lagging and inaccurate display, which can affect measurement accuracy. At this point, it is necessary to clean and maintain the magnetic flap level gauge, and one important task is to "brush" it. This article will provide a detailed introduction to the precautions and operating methods that need to be taken after brushing the magnetic flap level gauge.

  1、 Why use a magnetic flap level gauge?

  The flap of the magnetic flap level gauge is usually made of materials such as stainless steel and titanium alloy, and the surface is coated with brightly colored magnetic materials. During long-term use, due to the corrosion of the measuring medium, sediment adhesion, and environmental factors, the flipping surface may experience the following problems:

  Dirt deposition: Impurities, particles, etc. in the measuring medium will gradually deposit on the surface of the flipper, affecting its flexibility and causing lagging or inaccurate display. Corrosion phenomenon: If the measuring medium is corrosive, it may corrode the surface of the flip plate, affecting its service life and measurement accuracy. Magnetic material detachment: The magnetic material on the surface of the flip board may detach after long-term use, affecting the flipping and display effect of the flip board. In order to ensure the measurement accuracy and service life of the magnetic flap level gauge, it is necessary to regularly clean and maintain the flap, timely remove dirt, prevent corrosion, and repair damaged magnetic materials. This is the purpose of "brushing" the magnetic flap level gauge.

  2、 What should be paid attention to when brushing the magnetic flap level gauge?

  Brushing the magnetic flap level gauge is a task that requires careful and patient operation. Improper operation may damage the flap and affect the normal use of the level gauge. Therefore, before proceeding with the operation, it is necessary to pay attention to the following matters:

  Safety: Before performing any operation, the power supply of the liquid level gauge must be cut off, the pressure inside the container must be released, and necessary safety precautions must be taken to prevent accidents. Choose the appropriate tool: When using a brush magnetic flap level gauge, choose a soft, lint free cotton cloth or sponge, as well as a cleaning agent. Avoid using hard tools such as steel wire balls and sandpaper to avoid scratching the surface of the flipping board. Gentle operation: When brushing the flipper, gentle movements should be used to avoid excessive force and damage to the flipper or magnetic materials. Pay attention to waterproofing: The magnetic flap level gauge usually contains electronic components inside, so waterproofing should be taken into account during the cleaning process to avoid water or cleaning agents entering the level gauge, causing short circuits or damage. Thoroughly dry: After cleaning, use a dry cotton cloth to wipe off the moisture on the surface of the flipper and let it air dry naturally to avoid residual moisture affecting measurement accuracy. 3、 How to brush the magnetic flap level gauge?

  The operation steps for brushing the magnetic flap level gauge are as follows:

  Preparation work: Prepare cleaning tools, cleaning agents, dry cotton cloth, etc. Dismantling the flap: Select the appropriate tool to dismantle the flap according to the model and structure of the liquid level gauge. During the disassembly process, be careful not to forcefully pull or tug on the flipper to avoid damaging the flipper or connecting components. Cleaning the flipper: Soak the disassembled flipper in a container filled with cleaning agent for a period of time, then gently wipe the surface of the flipper with a soft cotton cloth or sponge to remove dirt and attachments. For stubborn stains, cleaning agents can be used for treatment. Check the flipper: After cleaning, carefully inspect the flipper surface for residual dirt, corrosion marks, and magnetic material detachment. If any problems are found, they should be dealt with promptly. Install the flipper: Install the cleaned and dried flipper back in the reverse order of disassembly. During installation, attention should be paid to the installation direction and position of the flipper to ensure that it can be flexibly flipped over. Debugging and running: After installation, debug and run the liquid level gauge to check whether the flip plate can flip normally and whether the display is accurate. If any problems are found, they should be adjusted in a timely manner. 4、 Maintenance of magnetic flap level gauge after brushing

  In order to extend the service life of the magnetic flap level gauge, in addition to regular cleaning and maintenance, the following points should also be noted:

  Choose a suitable installation location: Avoid installing the level gauge in environments with direct sunlight, high temperature and humidity, and high levels of corrosive gases. Regular inspection: Regularly check the working status of the liquid level gauge, observe whether the flap is flexible, whether the display is accurate, and whether the connecting components are loose. If any problems are found, they should be dealt with promptly. Correct operation: When using a level gauge, follow the operating procedures to avoid exceeding the limit or misoperation, which may affect the measurement accuracy and service life of the level gauge. In short, the maintenance and upkeep of the magnetic flap level gauge are crucial for ensuring its measurement accuracy and extending its service life. As an important maintenance task, 'brushing' requires operators to possess certain knowledge and operational skills. I hope this article can help everyone better understand the "brushing" operation of the magnetic flap level gauge, so as to better maintain it

Related Cases

The magnetic inductive flowmeter industry, these are successful cases with comparable and reference value.

Please Fill In Your Request And We Will Contact You As Soon As Possible!

Whatsapp
Inquiry
Top