How to choose and use the remote transmission type magnetic flap level meter

Project Overview

　　According to the different installation position in the vessel, it provides two forms of side mounting and top mounting. According to the different working media, it provides three kinds of materials: stainless steel and ABS, PP-R engineering plastics, among which ABS, PP-R materials are suitable for acid, alkali and other corrosive media.

　　Product selection: remote magnetic flap level meter this product is also known as magnetic level meter, magnetic column level meter, magnetic float level meter, it is the use of magnetic coupling principle to work, the product makes up for the glass tube level meter can not work at high temperature and high pressure and fragile multiple shortcomings. There are two kinds of installation methods: side mounted and top mounted, no matter what kind of method, it can be bundled with remote transmission device, so that the level meter can display the liquid level locally and monitor the liquid level remotely. The bundled magnetic flip-flop level meter can be called remote magnetic flip-flop level meter.

　　Although the process of making the magnetic flap level meter is very simple, but the magnetic flap level meter as a measuring instrument, especially the remote type remote magnetic flap level meter how to use?

• 1、No magnetically conductive material is allowed to approach around the body of the magnetic flap level meter, and it is forbidden to fix it with iron wire, otherwise it will affect the normal work of the magnetic flap level meter;
• 2、If the user adopts the accompanying heat pipeline by himself, he must choose the non-conducting material, such as purple copper pipe. Accompanying heat temperature according to the medium to determine.
• 3、Magnetic flap level meter must be installed vertically, magnetic flap level meter and the vessel should be equipped with a ball valve between the lead pipe for easy maintenance and cleaning.
• 4、The medium should not contain solid impurities or magnetic substances, so as not to cause obstruction to the float.
• 5、Before use, the small ball below the zero position should be set to red and the other balls should be set to white with a calibrated magnet.
• 6、Open the bottom flange and install the magnetic float (Note: heavy end with magnetic end up, not upside down) .
• 7、According to the media, the main tube should be cleaned from time to time to remove impurities.
• 8、For the liquid level meter exceeding a certain length (common type > 3 meters, anti-corrosion type > 2 meters), it is necessary to increase the intermediate reinforcement flange or ear climbing as a fixed support to increase the strength and overcome its own weight.