How to extend the service life of the magnetic flip version of the liquid level meter

Project Overview

Magnetic Flip Flop Level Gauge in the application process inevitably wear and tear aging and dirt accumulation, these will not only make the service life of the magnetic flip flop level gauge affected, but also lead to measurement errors, resulting in inaccurate measurement results. Today, we mainly introduce how to maintain the magnetic flip-plate level gauge in order to prolong the service life of the product, reduce the maintenance cost for you, and effectively control the cost.

• 一、In the process of using the magnetic flap level gauge, it is necessary to keep the verticality of the main pipeline, so that the magnetic float in the main pipeline avoids friction with the pipe wall, which may cause damage to the components and affect the measurement effect.
• 二、The connecting flange of the magnetic flap level gauge adopts the installation mode that can be rotated by 360°, which is convenient for connecting with the outer wall of the tank. In the installation of the liquid level gauge needs to be installed between the liquid level gauge and the installation interface with a pair of shut-off valves, this pair of shut-off valves can be disassembled and installed at will, without affecting the leakage of the liquid in the tank and corrosion, to the future service and maintenance provides great convenience.
• 三、In the process of using jacketed magnetic flap level gauge, you should try to keep the tank without magnetic conductive substances around. Because the magnetic conductive material will directly affect the lifting speed of the magnetic float in the main pipeline, which will make the measurement results produce errors, and even destroy the magnetism of the internal components of the main body, so that it can not be used normally.
• 四、The measured medium in the tank body, such as precipitation and solidification phenomenon under the influence of the environment or weather, the staff need to clean and maintain the magnetic flap level gauge regularly. Because too much precipitation or solidification will have a certain impact on its measurement data, seriously shorten the service life of the liquid level gauge, increase production costs.
• 五、When cleaning and maintaining the magnetic flap level gauge, you can slow down the speed of the liquid into the container, because the flow rate is too fast will have an impact on the float, increase the shock and friction between the float and the inside of the pipe wall, so that its measurement error, affecting the measurement results.
• 六、The main part of the jacketed magnetic flap level meter can be seen in the window with red and white columns, the red columns represent the height of the liquid level, and the white columns represent no liquid.