Metal tube float flowmeter needle jitter causes and solutions

Project Overview

• 1、Pointer slight jitter caused by: generally due to fluctuations in the medium. Solution: can be used to increase the damping way to overcome.
• 2、Pointer moderate jitter caused by: generally due to the flow state of the medium caused. For gas is generally caused by the medium operating pressure instability. Solution: the use of pressure or flow regulator to overcome or increase the float flowmeter gas damping.
• 3、Pointer jittering solution: mainly due to the media movement, gas pressure instability or the user to give the gas operating state of the pressure, temperature, flow rate and the actual state of the metal tube float flowmeter does not match, there are high differences caused by the float flowmeter over the range.

Supmea produces metal tube float flowmeter for many years, if you encounter any problems in the process of metal tube float flowmeter selection, installation, use, maintenance, feel free to contact Supmea staff, we help you answer.