Vortex flowmeter installation to pay attention to what are the main points?

Time: 2024-07-12
Equipment Configuration:magnetic inductive flow meter

Vortex flowmeter in more and more industries inside the application, vortex flowmeter is widely used in large, medium and small-scale pipeline water supply and drainage, industrial circulation, sewage treatment, oils and chemical reagents, as well as compressed air, saturated vapour and superheated vapour, natural gas, a variety of media flow measurement and can be used as a flow transmitter used in automation control systems.

Project Overview

Today Supmea senior staff for you to explain the vortex flowmeter installation should pay attention to the main points:

  • 1、Reasonable choice of installation sites and environment to avoid strong power equipment, high-frequency equipment, strong power switching equipment; avoid the impact of high-temperature heat and radiation sources, avoid strong vibration places and strong corrosive environments, etc., and at the same time to consider the installation and maintenance convenience.
  • 2、Upstream and downstream must have enough straight pipe section if the upstream of the sensor installation point in the same plane with two 90-degree elbows, then: upstream straight pipe section ≥ 25D, downstream straight pipe section ≥ 5D. if the upstream of the sensor installation point in different planes with two 90-degree elbows, then: upstream straight pipe section ≥ 40D, downstream straight pipe section ≥ 5D. regulating valves should be installed in the downstream of the sensor beyond 5D, if must be installed in the sensor upstream, sensor upstream straight pipe section should be not less than 50D, downstream should not be less than 5D. If it must be installed in the upstream of the sensor, the upstream straight pipe section of the sensor should be not less than 50D, and the downstream should be not less than 5D.
  • 3、When the sensor is mounted on a pipe with insulation to measure high temperature vapours, the insulation must not exceed one third of the height of the bracket.
  • 4、When measuring gas flow, the sensor can be mounted on a vertical pipe in any direction of flow.

Supmea has been producing vortex flowmeter for many years, if you encounter any problems in the process of vortex flowmeter selection, installation, use, maintenance, you can contact Supmea staff, we are ready to answer for you.

Related Cases

The magnetic inductive flowmeter industry, these are successful cases with comparable and reference value.

Please Fill In Your Request And We Will Contact You As Soon As Possible!

Whatsapp
Inquiry
Top