What is the best flow meter for syrup?

Time: 2024-07-12
Equipment Configuration:magnetic inductive flowmeter

Flowmeter in the food industry is widely used, syrup metering applications, the choice of what flowmeter is better?

Project Overview

  Because of the characteristics of the syrup itself is relatively viscous and not very stable, so the syrup flow meter selection can be used well, mainly depends on the choice of flow meter measurement principle, syrup flow measurement is divided into two cases, one is the production of syrup for the production of finished or semi-finished products within the factory in the production process of metering control and monitoring, the other need for quantitative control, and then need to add syrup quantitatively to the other materials, this kind of In this case, it is necessary to add the accuracy, mostly used in beverage and other industries.

  According to the use of different industries and applications for the accuracy of flowmeter measurement of different choices of different flowmeter, accuracy requirements are not high, you can choose target flowmeter, elliptical gear flowmeter. Measurement to be quantitatively added to the relatively high accuracy requirements of the site can choose to measure the Coe's force mass flow meter. Coriolis mass flowmeter is the use of fluid mass flow on the vibration of the tube oscillation modulation effect of Coriolis force phenomenon as the principle of mass flow measurement for the purpose of mass flowmeter, generally composed of sensors and transmitters.

  Koch force mass flowmeter selection needs to provide the measurement of syrup temperature, viscosity, density, pipe diameter, pressure, flow range and other relevant parameters, only the correct selection to ensure good application. Mass flow meter sensor installation precautions:

  • 1、The mass flow meter sensor should be mounted so that the sensor flow direction marking coincides with the fluid flow direction. When the mass flowmeter measures liquid, the shell should be installed downward. Prevent gases from gathering in the sensor vibration tube. When the mass flow meter measuring gas, the shell should be installed upwards to prevent the liquid gathered in the sensor vibration tube. When the measurement of the medium is suspended liquid, the sensor should be used side vertical installation. The flow direction of the medium is bottom-up flow through the sensor.
  • 2、Mass flow meter is based on the measuring tube vibration principle of measuring flow meter, so the sensor should be considered when installing the relevant piping to do solid support, to avoid vibration of the instrument and related piping.
  • 3、If strong pipework vibrations are unavoidable, it is recommended to isolate the pipework from the instrumentation sensors using flexible pipes.
  • 4、The connecting flange surfaces should be parallel to each other during installation, so that the centres of the two flanges are located in the same axis to avoid additional stress.
  • 5、Measure the liquid flow should be as far as possible to make the fluid flow from the bottom to the top, at the same time should avoid the instrument is installed in the pipeline higher, to prevent the pipeline gas gathering affect the normal operation of the instrument.

Related Cases

The magnetic inductive flowmeter industry, these are successful cases with comparable and reference value.

Please Fill In Your Request And We Will Contact You As Soon As Possible!

Whatsapp
Inquiry
Top