Vortex flowmeter manufacturers reveal: how to maintain the flowmeter?

Project Overview

　　Vortex flow meter is a widely used instrument in the field of flow measurement. It measures the flow rate of a fluid by utilizing the vortex effect, and then calculates the flow rate of the fluid. However, vortex flow meter will have some problems during long-term use, which need to be maintained and serviced.

　　Supmea vortex flowmeter picture

　　1.Cleaning the turbine and flow path

　　During the long-term operation of vortex flowmeter, the turbine and flow path may be covered by dirt or corrosive substances, which may affect the measurement accuracy of the flowmeter. Therefore, regular cleaning of the turbine and flow path is very necessary. When cleaning, you can use appropriate solvents and brushes for cleaning.

　　2. Regular calibration

　　Vortex flowmeter after a period of time, there may be errors, the need for regular calibration. Calibration can use the standard flowmeter for comparison calibration, found that the error is adjusted to ensure the accuracy of the flowmeter.

　　3. Check the power supply and signal lines

　　Vortex flowmeter power supply and signal lines also need to be checked to ensure its normal operation. If the power supply and signal lines are found to be faulty, they need to be repaired or replaced in a timely manner.

　　4. Keep dry

　　The sensitive parts of vortex flowmeter need to be kept dry to avoid moisture or water. In general, vortex flowmeter is installed in the closed pipe, which can prevent the entry of humid air. However, care needs to be taken to avoid water ingress during installation or disassembly.

　　In short, vortex flowmeter is a precision instrument that requires regular maintenance and repair to ensure its normal operation and measurement accuracy. At the same time, the user needs to understand and master the maintenance method, to avoid malfunction and damage caused by improper operation.