Want to accurately measure flow under complex flow conditions?

Project Overview

　　Flow meters are commonly used instruments and equipment in industrial production to measure the flow of fluids in pipelines. In some complex flow conditions, such as high-viscosity liquids, gas-liquid two-phase mixing, low flow rate, etc., the traditional flowmeter is often unable to accurately measure the flow. The balance flowmeter can be a good solution to these problems, to ensure the accurate measurement of flow.

　　Balance flowmeter is a use of pressure loss in the pipeline to measure the flow rate of the instrument, its working principle is the use of orifice plate or ife and other devices in the pipeline to form a local resistance, so that the fluid flow through the place when the pressure loss, and then through the pressure difference to calculate the flow rate. Compared with the traditional flowmeter, balance flowmeter has the advantages of simple structure, easy to use, wide measurement range.

　　Supmea balanced flow meter picture

　　In the measurement of high viscosity liquid, the traditional flowmeter may be too viscous and cause pressure loss is not obvious, it is difficult to accurately measure the flow rate. The balanced flowmeter can increase the thickness of the orifice plate or reduce the aperture of the orifice plate, etc., so that in the flow of high-viscosity liquids can also produce obvious pressure loss, thus ensuring the accurate measurement of the flow rate.

　　In the case of gas-liquid two-phase mixture, the traditional flowmeter often can not distinguish between gas and liquid flow, can not be accurately measured. The balance of the flowmeter can use the gas and liquid phase different density and viscosity and other characteristics, through different orifice plate design and combination, to achieve accurate measurement of gas and liquid phase flow.

　　In the case of low flow rate, the traditional flowmeter may be difficult to accurately measure due to the small flow rate. Balance flowmeter can be used through the use of small aperture orifice plate and increase the thickness of the orifice plate and other ways to increase the pressure loss, so as to ensure the accuracy of the flow measurement in the case of low flow rate.

　　In short, the balance of the flowmeter has a simple structure, easy to use, wide range of advantages, applicable to a variety of complex flow conditions under the flow measurement. In industrial production, the use of balanced flowmeter for flow measurement, can improve production efficiency, ensure production quality, has important practical application value.