Is it better to choose pipe type or plug-in type for dn80 gas flow meter?

Project Overview

If the pipe diameter is small (usually between DN4 and DN200) and the fluid characteristics allow the use of a pipe-type flow meter, it is more recommended to choose the pipe-type flowmeter. Therefore, it is recommended to choose the pipeline type for DN80 gas flow meter.

Insertion flow meters are more suitable for larger diameter pipes (DN100 to DN2000) as they reduce the impact on flow and reduce installation costs.

In fact, the choice of pipeline type or insertion type gas flow meter depends on many factors, including:

1. Measurement accuracy requirements:

If a higher Measurement accuracy (such as ±0.5 grade or ±1.0 grade), in-line flow meters may be more suitable because they usually provide higher accuracy grades.

The accuracy level of the insertion flow meter is lower, usually ±1.5 or ±2.5.

2. Working conditions:

If the on-site environmental conditions are harsh, such as high vibration, large pressure changes or extreme temperatures, certain types of insertion flow meters may be more suitable. these conditions.

3. Maintenance requirements and costs:

Insertion flow meters may be easier to remove and replace for maintenance without interrupting the operation of the entire piping system. This could impact long-term operating costs.

In general, the selection process should consider all relevant engineering parameters, application requirements and budget constraints, and it is best to seek professional advice from the flow meter supplier to ensure that the selected device will meet the specific application requirements.