Today we mainly look at the application of vortex flowmeters in the power plant's smart heating network system and the main performance parameter requirements.
![[!--tupainalt1--]](/d/file/p/2024/09-29/52a11c30355d86b15ced3cabd1cffcce.jpg)
The power plant smart heating network system is based on the Internet of Things architecture, which combines the traditional heating of the power plant with intelligent operation to achieve remote monitoring and control. The composition of the power plant's smart heating network system is relatively complex.
In the smart heating network system of the power plant, the vortex flowmeter can be used in the thermal user measurement and control terminal to measure the temperature, pressure, flow and other parameters of the terminal pipeline. Its main performance parameter requirements are:
Range ratio: greater than 10:1
Measurement accuracy: better than ±1%
Repeatability: in the smallest straight pipe section During 2D installation, the repeatability is not less than ±0.1%
Applicable pressure: 0～16MPa
Ambient temperature: -10～100℃
Ambient humidity: 5 ~100% relative humidity
We welcome consultation on specific power plant smart heating network system-related technologies.
The magnetic inductive flowmeter industry, these are successful cases with comparable and reference value.
In order to reduce measurement errors, whether it is a wafer-type vortex flowmeter or other types of vortex flowmeters, the pressure measurement point should be selected after the table.
View More
The steam prepaid vortex flowmeter cannot be welded with the sensor when welding the flange and the straight pipe section.
View More
The IC card steam prepayment system is composed of a contactless radio frequency Mifare1S50 logic encryption card, intelligent flow meter and control actuator.
View More
Hangzhou Economic Development Area，Hangzhou 310018，China
