How to choose the right compressed air flow meter?

Project Overview

The compressed air flow meter can be measured using a turbine flow meter, which has good adaptability in working conditions where flow measurement is difficult, such as small flow, high viscosity, easy condensation and blockage, high temperature, strong corrosion, strong vibration, etc.

When choosing a compressed air flow meter correctly, you should pay attention to the following points:

1. Pay attention to product selection and put product selection in the first place.

1. Whether the on-site pipeline installation conditions meet the requirements;

2. Whether there is signal interference on site;

3. The power cord of the on-site flow meter should not be connected to the large Power equipment shares or runs in the same trunking;

4. The user’s configuration requirements for the meter and power supply requirements.

2. Pay attention to the correct installation of the meter, and try to meet the requirements of the straight pipe of the flow meter. Install it horizontally as much as possible. Note that the inner diameter of the meter should correspond to the inner diameter of the pipe, and the flange bolts should be Tighten everything up and there should be no dripping. Pay attention to the correct wiring of the meter. If it is in the open air, take measures to protect the compressed air flow meter from rain and sun.

3. The quality of the compressed air flow meter product is also key. Only good products can perform accurate measurement and avoid essential failures.

Digital vortex flowmeter, electromagnetic/ultrasonic flowmeter, balance flowmeter, flow totalizer, prepaid metering system and other related technical exchanges are welcome to consult.