Three aspects to improve the reliability of metal tube float flowmeter

Project Overview

The main method to improve the reliability of flow measurement is to improve the reliability of the flow meter itself. With the advancement of technology, the reliability of metal tube float flowmeters has been greatly improved, mainly including the following three points:

1. The metal tube float flowmeter introduces self-diagnosis technology and sends the diagnosis results to At the operation station, the equipment management system (AMS) displays and alarms so that faults can be discovered in time and measures can be taken early.

2. Introduce redundant technology. If dual sensors are used and it is automatically judged whether the sensor is normal, the fault signal will be eliminated.

3. By improving the structural design of the flow meter, the reliability of the metal tube float flow meter system is improved. If the continuous flow plug-in structure is used, the flow meter can be replaced without affecting the process operation. The clamping structure of the ultrasonic flow sensor and the structure of the vortex flowmeter sensor with the ultrasonic probe installed outside the tube can greatly shorten the repair time after the metal tube float flowmeter instrument is damaged.