Card-mounted vortex flowmeter parameters
The vortex flowmeter is based on the Karman vortex principle to measure the volume flow of gas, steam or liquid, the volume flow or mass flow of standard conditions.
View MoreMagnetic flap liquid level meters will encounter many problems during use.
Magnetic flap liquid level meters will encounter many problems during use. How to solve these problems? We need to pay attention to the following points in daily operations and introduce the situation in detail:
Glass plate liquid level gauge can be directly used to observe the liquid level of media in various containers. It is suitable for liquid level indication in petroleum, chemical and other industrial fields. The liquid level meter has a simple structure, intuitive and clear observation, no clogging, no leakage, easy installation and simple maintenance. The upper and lower mounting flanges of the glass plate level gauge are connected to the container to form a connector. The actual height of the liquid level in the container can be directly observed through the glass plate. The upper and lower valves are equipped with safety steel balls. When the glass is accidentally damaged, the steel balls will automatically seal under the action of the internal pressure of the container to prevent the liquid in the container from overflowing and ensure the safety of the operator.
1. When installing the magnetic flap liquid level gauge, the magnetic flap liquid level gauge must be kept vertical. A ball valve should be installed between the magnetic flap liquid level gauge and the container lead pipe to facilitate installation. Maintenance, disassembly and cleaning of liquid level gauges. The liquid medium being measured should not contain solid impurities or magnetic substances, otherwise it will easily cause obstruction to the float and affect the accuracy of the measurement.
2. When selecting the installation location of the magnetic flap level gauge, it should avoid or stay away from the inlet and outlet of the material medium to avoid rapid changes in local areas of the material fluid, which will affect the accuracy of the liquid level measurement. During debugging, you should first open the upper guide pipe valve, and then slowly open the lower valve to allow the medium to enter the main pipe smoothly (during operation, the medium should avoid rapid impact on the float, causing violent fluctuations in the float and affecting the display accuracy), and observe whether the magnetic red and white balls flip over. If it is normal, then close the downpipe valve, open the drain valve, and let the liquid level in the main pipe drop. Operate according to this method three times. If it is indeed normal, it can be put into operation.
3. The magnetic flap level gauge is the simplest direct indicating level instrument that works under higher pressure. Its reliability and economy are unmatched by other instruments. As a basic Liquid level indicating instruments are indispensable in the simplest liquid level measurement situations and in large-scale engineering projects with a high degree of automation. The liquid path composed of the main body of the magnetic flip plate liquid level meter is connected to the measured container through a pipe flange or tapered pipe thread to form a connector. The liquid level observed through the glass plate is the same as the liquid level in the container, that is, the liquid level height. .
4. When disassembling and cleaning the liquid level gauge, you can open the bottom flange and take out the magnetic float level gauge for cleaning. After cleaning, be sure to pay attention when installing the magnetic float: the heavy end with the magnetic end should face upward. , must not be installed upside down, otherwise the level gauge will not work properly. Before use, use a calibration magnet to turn the balls below zero into red and the other balls into white.
The magnetic inductive flowmeter industry, these are successful cases with comparable and reference value.
The vortex flowmeter is based on the Karman vortex principle to measure the volume flow of gas, steam or liquid, the volume flow or mass flow of standard conditions.
View MoreThe vortex flowmeter is based on the Karman vortex principle to measure the volume flow of gas, steam or liquid, the volume flow or mass flow of standard conditions. volumetric flowmeter.
View MoreAs metal tube float flowmeters are used in more and more fields and in more and more enterprises, products that can meet the needs of different working environments are launched.
View MoreHangzhou Economic Development Area,Hangzhou 310018,China