Can V-cone flow meters be used in blast furnace gas applications?

Project Overview

　　Blast furnace gas is a by-product generated in the process of blast furnace iron production, is a low calorific value of the fuel, generally for the enterprise's own use, so it is very important for its flow measurement, which not only reflects the efficiency of the production, but also for the production of power.

　　V cone flowmeter is a differential pressure flowmeter, used to measure almost all gases and liquid media. Can be applied to high temperature and high pressure conditions, in the production of blast furnace gas, the ambient temperature and the finished product temperature are high, very consistent with the V cone flowmeter can be measured conditions, so the V cone flowmeter can be used to measure the blast furnace gas.

　　General market commonly used flowmeter is mainly electromagnetic flowmeter and V cone flowmeter. But the electromagnetic flowmeter for the measurement of the media requirements, it can only measure the conductivity greater than or equal to 5μS/cm and fluidity of the liquid media, not for blast furnace gas. While the V cone flow meter can measure gas and liquid media, for mobility and conductivity without special requirements. So choose V cone flowmeter can accurately measure the flow of blast furnace gas.

　　I believe that now you have a certain understanding of the blast furnace gas flow measurement of the instrument selected, welcome to exchange discussions.